With an active membership you will have access to all the CCNA labs on eConfigs. They are expertly designed to enhance your understanding of the CCNA exam topics. Hands on configurations are by far the best way to comprehend the material.
Most pages have a PacketTracer Lab file and step-by-step lab instructions. With an active paid membership you will be able to run the .pkt file and view the lab instructions.
View the list below for all posts with labs.
CCNA Labs
- CCNA 1.1: Compare and contrast OSI and TCP/IP models (FREE LAB!)
- CCNA 1.2: Compare and contrast TCP and UDP protocols
- CCNA 1.7: Select the appropriate cabling type based on implementation requirements
- CCNA 1.9: Configure, verify and troubleshoot IPv4 addressing and subnetting
- CCNA-1.11: Describe the need for private IPv4 addressing
- CCNA-1.12: Identify the appropriate IPv6 addressing scheme to satisfy addressing requirements in a LAN/WAN environment
- CCNA 1.13: Configure, verify and troubleshoot IPv6 addressing
- CCNA 1.14: Configure and verify IPv6 Stateless Address Auto Configuration
- CCNA 2.4: Configure, verify, and troubleshoot VLANs (normal/extended range) spanning multiple switches
- CCNA 2.4.a: Access ports (data and voice) (FREE LAB!)
- CCNA 2.4.b: Default vlan
- CCNA 2.5.a: Trunk ports
- CCNA 2.5.b: Add and remove VLANs on a trunk
- CCNA 2.5.c: DTP – Dynamic Trunking Protocol (DTP)
- CCNA 2.5.d: VTP (v1&v2) – VLAN Trunking Protocol
- CCNA 2.5.e: 802.1Q
- CCNA 2.5.f: Native VLAN
- CCNA 2.6.a: STP mode (PVST+ and RPVST+)
- CCNA 2.7.a: PortFast
- CCNA 2.7.b: BPDU Guard
- CCNA 2.8.a: Cisco Discovery Protocol (CDP)
- CCNA 2.8.b: Link Layer Discovery Protocol (LLDP)
- CCNA 2.9.a: Static PortChannel
- CCNA 2.9.b: Port Aggregation Protocol (PaGP)
- CCNA 2.9.c: Link Aggregation Protocol (LACP)
- CCNA 3.1.a: Packet handling along the path through a network (FREE LAB!)
- CCNA 3.1.c: Frame Rewrite
- CCNA 3.4.a: Router on a Stick
- CCNA 3.4.b: Switch Virtual Interface (SVI)
- CCNA 3.8.a: Default route
- CCNA 3.8.b: Network route
- CCNA 3.8.c: Host Route
- CCNA 3.8.d: Floating Static Route
- CCNA 3.9: Configure, verify, and troubleshoot single area and multi-area OSPFv2 for IPv4
- CCNA 3.10: Configure, verify, and troubleshoot single area and multi-area OSPFv3 for IPv6
- CCNA 3.11: Configure, verify and troubleshoot EIGRP for IPv4
- CCNA 3.12: Configure, verify and troubleshoot EIGRP for IPv6
- CCNA 3.13: Configure, verify, and troubleshoot RIPv2 for IPv4
- CCNA 4.1: Configure and verify PPP and MLPPP on WAN interfaces using local authentication
- CCNA 4.2: Configure, verify, and troubleshoot PPPoE client-side interfaces using local authentication
- CCNA 4.3: Configure, verify and troubleshoot GRE tunnel connectivity (FREE LAB!)
- CCNA 4.6: Configure and verify single-homed branch connectivity using eBGP IPv4
- CCNA 5.1: Describe DNS lookup operation
- CCNA 5.3.a: Configure and verify DHCP on a router – Server
- CCNA 5.3.b: Configure and verify DHCP on a router – Relay
- CCNA 5.3.c: Configure and verify DHCP on a router – Client
- CCNA 5.3.d: Configure and verify DHCP on a router – TFTP, DNS and gateway options
- CCNA 5.3: Configure and verify DHCP on a router
- CCNA 5.4: Troubleshoot client- and router-based DHCP connectivity issues
- CCNA 5.5: Configure, verify, and troubleshoot basic HSRP
- CCNA 5.6: Configure, verify, and troubleshoot inside source NAT
- CCNA 5.7: Configure and verify NTP operating in a client/server mode
- CCNA 6.1: Configure, verify, and troubleshoot port security
- CCNA 6.3: Configure, verify, and troubleshoot IPv4 and IPv6 access list for traffic filtering
- CCNA 6.5: Configure, verify, and troubleshoot basic device hardening
- CCNA 7.1.a: SNMPv2
- CCNA 7.1.c: Syslog
- CCNA 7.3.a: Backup and restore device configuration
- CCNA 7.3.b: Using Cisco Discovery Protocol or LLDP for device discovery
- CCNA 7.3.d: Logging
- CCNA 7.3.e: Timezone
- CCNA 7.3.f: Loopback
- CCNA 7.4: Configure and verify initial device configuration
- CCNA 7.5.a: Cisco IOS upgrades and recovery (SCP, FTP, TFTP, and MD5 verify)
- CCNA 7.5.b: Password recovery and configuration register