CCNA 1.10: Compare and contrast IPv4 address types
Understand the different IPv4 address types.
- Loopback - this IP points back to the device's TCP/IP stack. Pinging it tells you whether TCP/IP has been installed and is running.
- Layer 2 broadcasts - Layer 2 broadcast traffic stays within a local area network (LAN) boundary; known as the broadcast domain. Layer 2 broadcast traffic is sent to the broadcast domain using a MAC address of FF:FF:FF:FF:FF:FF.
- Broadcast - layer 3 - Layer 3 broadcasts are sent to the broadcast network address, which is the last IP in a subnet. If the IP network is over ethernet, a layer 3 broadcast would also result in a layer 2 broadcast.
- Unicast - sent to a single device
- Broadcast - sent to all devices in a network (L2 is different than L3)
- Multicast - sent to a group of devices, but not all devices